|
To return to the homepage, please "Click"
on the back arrow of your browser We do these Classified Drive Train Pages as a FREE service, But we do appreciate Donations to help cover expenses!! |
|
|
To Make a Donation
to Big Al's Website, click to
the right or send it to Big Al's List ~ 488 Monroe Blvd. ~ Painesville, Ohio 44077 |
|
Buick Bell Housing |
Chrysler Parts |
Chevy Twin Tubo Kit |
Chevy Engine and Transmission |
Chevy Transmission |
Ford Engine Parts |
| Hudson Intake Set Up Description = twin H set-up for Hudson. Off of a 1952 Hornet and will fit either a 262 or a 308. All the linkage, breathers, are there, missing one carb, the remaining carb isn’t stuck, but tight, and needs rebuilt. I found a small crack in the exhaust chamber itself, but it can be easily repaired. If you have any questions please call Bill at 419-777-two six five two. I will send pictures, anytime. Quantity = 1 Price = $ 499.99, neg. I would like to trade for a model frame, it doesn’t have to be perfect. I would also take partial or trade acroos for 31 a sheet metal. What have you? Contact Info = Please E-mail Bill at Williams.allen65@yahoo.com or call Bill at 419-777-two six five two. I am in and out, you would have better luck e-mailing, or leave your number, and I will call back. CL000966 ~ 111111 |
|
 |
 |
Chevy Engine |
Ford 428 CJ Engine & Transmission |
Oldsmobile Engine |
Ford Pulley Set |
Chevy Rear End with or without wheels & tires |
Chevy Big Block Heads |
| 3 Speed Transmission Gears Description = One heck of a lot, about 90 brand new NOS gears for those 3 speeds you have been wanting to rebuild! They are all new in the boxes and ready for you to install them. All information is from a Republic Gear Company Catalog and is only as accurate as the catalog list. I have written all of the part numbers down and matched them as close as I could from the information in the catalog to the car or truck and year of usage. They can be sold by the piece or buy the whole package. They are located in the Painesville, Ohio area and can be picked up or we will ship them to you at your expense. A few of them have prices beside the listing, but all information is from a 1967 Catalog and are there just as a guide line. If you have any interest, please make me an offer for all or part. Click here for list. Quantity = about 90 pieces Price = Make Offer Contact Info = Please E-mail me at cratemotor@sbcglobal.net CL000646 ~ 122809 |
|
 |
 |
 |
 |
Chevy Engine |
Chevy Block |
Chevy Intake |
| Chevy Distributer Description = 1957 Chevrolet passenger dual point distributer GM, Photos available Quantity = one item Price = $ 100.00 Contact Info = Please call Ed at 440-478-5980 CL000925 ~ 090411 |
Ford Flathead Engine & Transmission |
Chevy Body & Running Gear Parts |
Torque Converter |
Chevy Cross Ram Manifold |
Ford Engine |
 |
 |
 |
Chevy Engine & Transmission |
 |
Original Chevy Shifter |
Big Block Chevy Stuff! |
Jaguar Rearend |
| Chevrolet Engine Description = 1989 Chevy 454 engine It has a Carb not EFI can hear run. Quantity = 1 Price = $ 1,000.00 no trades Contact Info = Please call Kevin at 440-668-9116 or Email me at kevinm0108@aol.com CL000889 ~ 050111 |
| Ford Engine & Transmission Description = 1986 Ford 460 Engine with C-6 Transmission Both look like they were rebuilt not to long ago. Can hear run. Quantity = 1 Price = $ 850.00 Contact Info = Please call Kevin at 440-668-9116 or Email me at kevinm0108@aol.com CL000888 ~ 050111 |
GM Inline Six |
Early Chevy Engine with 3 Speed |
VW Transaxle |
|
|
|
Muncie 4 Speed |
Big Block Chevy 454 |
Big Block Chevy Parts |
Edelbrock Dual-Quad Intake and Carb Package |
Crash Box Transmission with Shifter |
Mustang Drive-train Parts |
Keith Black Hemi Motor |
Valve Covers |
Cadillac Engines |
Ford Running Gear |
Small Block Chevy Parts |
Buick Engine |
Chevy Motor |
Big Block Chevy Parts |
Quick Fuel Technologies Carburetor |
572 cubic inch Rodeck MH Engine |
 |
Merlin 540 cubic inch Big Block Chevy |
|
 |
 |
Blown Merlin 540 cubic inch Big Block Chevy |
 |
Matched Pair of 526 Donavans |
|
 |
 |
Big Block Chevy Marine Engine |
 |
Indy Big Block Chevy Heads |
 |
 |
 |
Big Block Chevy Aluminum Intake |
|
 |
 |
 |
 |
Built Small Block Chevys |
 |
Big Block Chevy Motors |
 |
1937 Chevy Drive Train |
Ford Motor |
Mopar Drive Train Stuff |
|
.JPG) |
.JPG) |
.JPG) |
.JPG) |
.JPG) |
.JPG) |
.JPG) |
.JPG) |
| Chevy Tunnel Ram with Carbs Description = Small block Chevrolet tunnel ram and 500 cfm carbs. in excellent condition Includes chrome fuel line, fuel pressure gauge, chrome water outlet, linkage and aluminum scoop. If you have any questions, please ask. Price = $ 625.00 Contact Info = Please E-mail me at petes83@adelphia.net or call me at 440-834-8800 CL000799 ~ 120810 |
|
 |
 |
 |
 |
Chevy Tri Power |
Ford Engine |
Ford Motor |
Chevy Power Glide Transmission |
Chevy Manifold |
| Chevy Engine Description = 2004 4.8 Chevy LS engine, complete minus intake and it has a cracked head. It is located in Milton WV 25541 Quantity = 1 Price = $ 150.00 Contact Info = Please E-mail me at bigbtriplett@hotmail.com CL000772 ~ 101410 |
Chevy Engine |
Ford V-8 Motor |
Chevy 409 Motor |
1979 Itaska Sundancer Motorhome Parts |
Chevrolet Heads |
Chevy Truck Parts |
Engine & Transmission |
Corvette Motor |
| 292 Engine 2 Barrel Intake Manifold Description = Selling a 1958 292 2 BL intake manifold casting ECG 9425 H, located West of Cleveland Ohio. Quantity = 1 Price = $ 50.00 or best offer Contact Info = Please E-mail me at jdavis216@gmail.com or call John at 440-655-3691 CL000744 ~ 081510 |
292 Engine |
| Muncie M-21 4 Speed Description = Muncie M-21 4 speed transmission. Aluminum case. No stripped thread holes or any broken parts. One ring around the input shaft and 26 tooth, fine splined. Large 32 splined tailshaft. Case #3925661, Tail case #3978764. Side cover #3952648. POE24C stamped on main case. No other numbers. Complete rebuild. Front and main bearings, cluster bearings & shims. New brass, syncro rings, springs & struts. Rear bushings and shift shaft seals, gaskets and retainers. No cracks, no welds, all threads good. If you have questions, email me or call, 419-349-7549 and I will try to answer. If you want to see other pictures, let me kmow. There was no tag. No serial numbers stampings and no indication of what the application may have been. It will work in any Chevy but requires the big drive shaft yoke (turbo 400 style) because of the large tail-shaft.. It would appear that it may have been an over the counter purchase from a dealership. Code numbers on this tranny, POE24C, P=Muncie, 0=1970, E=May, 24=day of month, C=M22. Pictures available Quantity = 1 Price = $ 950.00 Price Reduction Contact Info = Please E-mail me at rdh4244@toast.net or call Jim at 419-349-7549 CL000421 01-17-09 |
| Mopar Motor Description = 1956 Plymouth Flathead 6 cylinder engine. 230 cubic inch complete from Oil Pan to Carb (Less Fan) Includes Bell Housing Engine Serial # p28*ii0656* Quantity = 1 Price = $ 350.00 or Best Offer Contact Info = Please call me at 330-718-8817 CL000739 ~ 031510 |
|
 |
 |
Oldsmobile Motor |
Mopar Motor |
| Chrysler Hemi Engine Description = I have everything to build a brand new 472 Hemi, here is a list of the items to go with this sale; New Hemi block in the box rough bore 4.19 This is the good block without the freeze plugs on front of block NIB complete 472 rotating assy all balanced crank-scat rods-scat pistons-Diamond balancer-scat SFI rated all brgs and rings complete rebuild, one E299 and one C 30 date code heads ready to bolt on rocker assy and shafts inline 2x4 original Chrysler intake with part number with 68-69 or 70 valve covers your choice. Quantity = 1 Price = $ 9,000.00 Contact Info = Please E-mail me at blewby2bad@aol.com or call me at 772-370-2538 CL000728 ~ 072410 |
|
 |
 |
 |
 |
Big Block Chevy Motor & Heads |
Studebaker Engine |
Mopar Engine |
Rear End Service |
GM ZZ3 350 Crate Motor |
Chrysler Engine & Transmission |
Chevy Engine & Transmission |
1963 Ford Falcon Drive Train |
Cleveland Engine |
2006 Mustang GT Rear-end |
Pontiac Drive Train |
Hurst “Indy Matic” Shifter |
Holly Dominator Intake |
| Ford Valve Covers Description = SBF FINNED ALUMINUM VALVE COVERS original CAL CUSTOM! For mid 60’s and fit 289-302-351w Ford. They need sand blasted or glass beaded, or as is for Rat Rod. Call or E-mail for pictures. Quantity = 1 set Price = $ 125.00 Contact Info = Please call Jim Maestrole at 724-238-4301 or me at jkmaestrole@comcast.net CL000656 ~ 123009 |
|
 |
 |
 |
 |
Hudson Dual Carb Set Up |
Edelbrock Carburetor |
1981 Chevy Engine |
 |
1954 Ford Engine |
 |
496 Cubic Inch BBC |
1955 to 1957 Chevy Parts |
Chevy Spindles |
Studebaker Engine & Transmission |
Plastic Hemi Engine |
GM Engine & Transmission |
1964 to 1967 GTO Running Gear |
Chevy Big Block Manifold |
G T O Drive-train |
Ford Engine |
Chevy Aluminum Heads |
Pontiac Transmission |
Edelbrock Carburetor |
|
 |
 |
Ring & Pinion |
Mustang II Rack & Pinion |
Ford Transmission |
Chevy Distributor |
|
 |
 |
Chevy Distributor |
 |
Chevy Fuel Pump |
 |
Chevrolet Heads |
Dual Quads |
Small Block Chevy |
Corvette Valve Covers |
Chevy 12 Bolt |
Alpha Romeo Spider Engine |
Mopar Heads |
390 Parts |
| Flathead Intake Manifold Description = Edelbrock Flathead Intake Dual 2 Barrel Quantity = 1 Price = $ 150.00 Contact Info = Please E-mail me at kcampana9@yahoo.com CL000452 004-29-09 |
 |
Chevy Engine Tie Downs |
Buick Fin Brakes |
| Original Corvette Dual Quads Description = 1957-1961 Corvette dual quad set-up, manifold and custom air cleaner. The carbs are #6-1273 and the manifold is #3739653. The set-up was working fine when taken off my 327 engine. The carbs may need rebuilt. Quantity = 1 manifold, two carbs, 1 air cleaner Price = $ 2500.00 or best offer Contact Info = Please E-mail me at nforcer1973@aol.com or call me at 330-646-5910 CL000445 04-07-09 |
|
 |
 |
 |
 |
 |
 |
| Chevy Heads Description = small block Chevy heads, casting #3767460, 1962-64 327 heads. exhaust 1.5, intake 1.72 68cc. working fine when taken off my 327. I just went to bigger 2.02 heads. Quantity = two heads, or one pair Price = $ 200.00 or best offer Contact Info = Please E-mail me at nforcer1973@aol.com or call me at 330-646-5910. CL000444 04-07-09 |
 |
 |
 |
 |
 |
| GM Rear-End Description = 1967 GM 3/4 ton Dana 60 rear end Price = $ 300.00 Contact Info = Please E-mail me at denversrarefinds@yahoo.com or call 330-547-2139 & ask for Denver CL000439 03-14-09 |
| 1938 Chevy Parts Description = Misc 1938 Chevy parts, 216 6 cylinder and 3 speed, drive-train, brakes, steering, some new, most are good used, photos available just ask Price = Please make offer Contact Info = Please E-mail me at conniesorg@verizon.net CL000430 03-02-09 |
| Ford T Rolling Chassis Description = 1926 model T rolling and running chassis. Rebuilt engine, new tires, electric start, box of new parts. Price = $ 1,500.00 Description = With splash aprons, hood, fenders, gas tank, Drive it on the trailer. Price = $ 2,000,00 Contact Info = Please call Larry at 814-437-1995 or 814-671-6056 or E-mail me at lmartz2@verizon.net CL000407 12-29-08 |
| H E I Distributor Rotor &
Cap Description = New in box HEI distributor Cap and Rotor. They are clear and would be very nice to dress up your engine. They will not fit in my 57 Chevy with small block as there is not enough room between engine and fire wall Quantity = 1 Price = $ 100.00 Contact Info = Please E-mail me at Hchevyguy57@sbcglobal.net CL000400 12-08-08 |
|
H E I Distributor |
| Parts = Misc. Drive Train Description = 25,xxx mile LT1 V-8 engine, 218/224 dur hyd roller, Isky springs, Comp roller rockers, aluminum valve covers, Moroso pan, alt relocation bracket Price = $ 1000.00 Description = 4th gen 10-bolt, Moser axles, Detroit Tru-track, motive 3.73's low,low miles Price = $ 600.00 Description = LT1 ATI harmonic balancer Price = $ 150.00 Description = LT1 ported head castings cut for 2.0/1.56 valves Price = $ 150.00 Description = 3.875 stroke Lunati crank, need a journal fixed Price = $ 300.00 Description = I am open to offers on above parts Price = Prices as marked or Buy it all for $ 1500.00 Contact Info = Please E-mail me at ramblerbme@yahoo.com or call me at 440-479-7769 CL000396 11-28-08 |
| Chevy 454 Big Block Motor Description = 454 cubic inch BBC 0.030 over, air gap intake, 850 double pumper, 4 bolt main, Isky 590-292 hyd cam, HEI 50,000 volt distributor, 11.25 cr, Speed Pro pistons. You can hear the motor run as it is still in car. I am selling it complete, top to bottom. Quantity = 1 Price $ 4,000.00 or Best Offer Contact info = Please E-mail me at jdsmontess@yahoo.com or call me after 6PM at 330-830-6496 CL000393 11-16-08 |
| Chevy Pistons & Rods Description = KB Hypereutectic pistons for 30 over SBC, Eagle H-Beam rods, new spring 08, will not separate Quantity = Set of 8 Price = $ 450.00 or Best Offer Contact Info = Please call me at 724-255-3174 CL000391 11-03-08 |
| Oldsmobile Motor Description = Complete 403 cubic inch motor from a 1977 Oldsmobile "98" Quantity = 1 Price = $ 500.00 Contact Info = Please call Ray at 216-475-4702 CL000385 10-08-08 |
| Chevy Valve Covers Description = BB Chevy Edelbrock Valve covers, Edelbrock Elite series # 4281, extra tall to clear most rocker arm assemblies. Plain no name, finned Aluminum, sold with Mr. Gasket Ultra gaskets. Beautify your BB Chevy engine. New still in original box. Quantity = 1 pr with Mr Gasket Ultra gaskets Price = $ 120.00 plus shipping & ins. unless you pick-up Contact Info = E-mail me at trjrstable@yahoo.com or call me at 724-882-4124 CL000377 10-04-08 |
| Chevy Motor Description = 350 cubic inch Chevy motor, complete with 0 miles on the rebuild, flat top pistons, Crane cam. All accessories go with motor A/C comp. Alternator, belts and pulleys, call for details. Quantity = 1 Price = $ 1800.00 Contact Info = Please E-mail me at joleb733@comcast.net or call 412-822-7298 and leave a message CL000375 10-03-08 |
| BB Chevy Edelbrock Valve
covers Description = Edelbrock Elite series # 4281, extra tall to clear most rocker arm assemblies. Plain no name, finned Aluminum. Sold with Mr. Gasket Ultra gaskets. Beautify your BB Chevy engine. Photo upon request. Quantity = 1 pair only Price = $ 120.00 for valve covers & gaskets Contact Info = Please E-mail me at trjrstable@yahoo.com or call me at 724-882-4124 CL000373 09-19-08 |
| Chevy Engine Parts Description = : SB Chevy 400ci long block Price = $ 300.00 Description = SB Chevy Pete Jackson gear drive Price = $ 100.00 Description = SB Chevy roller cam and kit Price = $ 500.00 Description = BB Chevy Lingenfelter oval port manifold Price = $ 300.00 Contact Info = Please call 440-343-6161 or E-mail me at rjsgarage@alltel.net CL000371 09-13-08 |
| Model A Drive-train Description = Complete running drive-train from 29 Model A coupe, front axle, all mechanical brake parts, extra engine that turns over,[no history], 5-good 21"tires and wheels, plus 8 more wheels with rough tires, steering columns, shocks, water pumps, dist. grill shell[needs plated}etc. plus 6 good 16"ford spoke wheels. left front fender, hood. Quantity = I would like to sell as a lot Price = Price open to negotiation, partial trades? need a 3-2 manifold for 283, big and littles, tires and wheels, big ford and mustang 5 lug patterns, and rear part of 80's Lincoln driveshaft, or what have you. Contact Info = Please E-mail me at truckinrog@yahoo.com or call anytime at 330 715 9243 and ask for Rog CL000367 09-09-08 |
| C-4 transmission and Torque
Converter Description = Ford C-4 transmission and Torque Converter for small block ford bell housing, photos available upon request Price = $ 225.00 or offer Contact Info = Call me at 440-974-8634 after 5pm or E-mail me at thewings@sbcglobal.net CL000335 07-17-08 |
| A M C Engine & Transmission Description = AMC 304 Engine and Automatic transmission from 1974 Matador coupe. Engine is complete with 2 BBL, included is a C.I.4BBL manifold and carburetor. Quantity = one Price = Asking $ 450.00 Contact Info = Call Larry at 412-559-6818 CL000331 06-15-08 |
|
Ford Engine |
| 1970 to 1972 Pontiac GTO
& Judge Transmission Description = original 3 speed transmission with correct HURST shifter. Lots more GTO stuff available! Price = $ 350.00 Contact Info = Please Call me at 440-254-4642 CL000328 06-11-08 |
| GM LS 6 Intake Description = GM LS 6 Intake and mass air flow sensor Quantity = 1 Price = $ 400.00 or Make offer Contact Info = Please Call John at 614-425-1604 CL000325 06-09-08 |
| 1988 Chevy G20 Van 350 with
700-R Transmission Description = Only 85 K miles, you can hear it run and drive it. Other parts from the Van also for sale call me for information on the Good sheet metal Quantity = 1 good running motor and transmission Price = $ 600.00 Or Best Offer Contact Info = Call Gary at 440 248 7177 or E-mail me at choptop49@aol.com CL000323 05-27-08 |
| Mopar Edelbrock Intake Description = Small Block Edelbrock Performer RPM intake, stin finish, #7176 used very little. Quantity = 1 Price = $ 125.00 Contact Info = E-mail me at theburbs@zoominternet.net or call Tom at 814-382-9066 CL000314 ~ 05-18-08 |
| 650 Holley with Hand Choke Price = $ 100.00 Contact Info = E-mail DougTheDog565@yahoo.com or Call 440-645-8817 CL000311 05-07-08 |
| 68 Buick GS Drive Train Description = A numbers matching 350 motor and matching 350 transmission with only 127 K miles on them. It is out of the car for easy loading. I will throw in an unused M.S.D. box for this motor. Price = $ 500.00 or Best Offer Contact Info = Call Chris at 508-832-5807 CL000304 03-15-08 |
| Ford 351 Cleveland 4V Cobra
Jet Engine Description = In time for spring and summer cruising. Professionally rebuilt 351 Cleveland 4V Cobra Jet engine complete from oil pan to intake. Motor is bored 0.030" for 357 cu in, approx 10:1 compression ratio 4 bolt mains, crank was ground 0.010" / 0.010", fresh valve job. Runs on pump gas. Desktop dyno numbers with 750 cfm is approx (415 hp @ 6000 rpm / 460 ft lbs torque @ 3500 rpm). This motor is in a 1970 Mustang coupe with a C4 transmission, transmission is not for sale. The motor has been broke in approx 500 miles so you can hear it running. New TRW hi-volume oil pump, pick up, front sump oil pan, Comp XE262H cam and complete Comp cam valve train, Edlebrock Performer 4V aluminum intake, Pro Comp electronic distributor and Weiand aluminum water pump. I am building a supercharged 5.0 so the Cleveland must go. Quantity: one Price = $3,250.00 or Best Offer Contact Info = E-mail me at dhorning@zoominternet.net or call 330.629.8162 and leave a message for Ron CL000299 03-02-08 |
|
Ford 351 Cleveland 2V Engine |
| Ford N Case's Description = Ford nodular 1973 N-case, super clean!! or a rare July 1968 Cobra-Jet nodular case with the "n" on the caps and the back of the case, also super clean!! Quantity = 2 Price = $ 225.00 each or will trade for some open 9 inch open centersections with standard cases. Gears/spline not important, just good cores that are complete.. Contact Info = Call me at 330-784-6088 after 12 noon. CL000297 03-02-08 |
| Chevy Motor Description = 1972 Monte Carlo 350 cubic inch motor that needs rebuilt. Price = $ 100.00 Contact Info = E-mail me at 73mc454@roadrunner.com CL000293 02-10-08 |
| 1971 Cobra Jet 428 FE Block Description = For sale is a 1971 Cobra Jet 428 FE block. This engine is fresh bored .030 with a torque plate. It was hot tanked, shot blasted, baked, and magged before being bored. It has no cracks, welds, stripped threads, or sleeves. This block is ready to assemble. The date code is "1A13", which should be January 13th, 1971. It has the "CI" cast on the back of the block. It has the heavy webbing on the mains. There is "66-427" on the back of the block, which was used to cast the 427's and some 428's. Quantity = 1 Price = $ 1,200.00 plus shipping Contact Info = fanugon@yahoo.com CL000284 |
| Ford Competition Plus Cam Description = Cam for Ford 429/460 motor (#34-234-4K) Xtreme energy cam and kit. Operates between 1200-5200 RPM.NEW IN THE BOX Quantity = 1 Price = New Cost $ 425.00 I will sell for $ 300.00 firm Contact Info = E-mail me at prostreetLTD@aol.com or call 216-433-1444 CL000273 |
| Ford 289 Engine with AOD
Transmission Description = Ford 289 complete, completely rebuilt from top to bottom and still wrapped in plastic, chrome valve covers, new Edelbrock intake manifold, new Edelbrock carb still in box, matching rebuilt AOD transmission & torque converter with flex plate. I have all receipts. Quantity = Sold as a lot Price = $ 4900.00 Contact Info = Call John at 440-823-3075 or Lou at 440-591-7293 or E-mail me at lpn1@roadrunner.com CL000270 |
| Chevy Engines Description = Short blocks, 1967 396 BBC all forged parts rebuilt #961 castings, steel crank, rods, forged pistons balanced assembly assembled 1968 396 BBC short block CE stamp stock rebuilt with steel crank, low miles Quantity = 2 short blocks Price = $ 2,500.00 each Contact Info = E-mail streblin@yahoo.com CL000264 |
| 1970 Z28 LT1 Short Block Description = Dated Z28 short block, recent rebuilt, steel crank, 4 bolt mains, 010/020 Hi Nickel block, Forged rods floater, 11-1 forged pistons, solid lifter cam, 8 inch balancer balanced assembly. Quantity = 1 short block Price = $ 2,700.00 Contact Info = E-mail streblin@yahoo.com CL000263 |
| Dodge Rear End Description = 1970 Dodge Challenger rear end, complete, 8.75. 2.76:1 gears Quantity = 1 Price = $ 225.00 Contact Info = email@ misv35079@yahoo.com or call 440-666-7227 after 5pm. Thanks. 000258 |
|
Engine Parts Plus |
| Engine Parts Description = rebuilt BBC & SBC engines & parts 1967 396 short block rebuilt, all forged parts 1968 396 short block rebuilt CE stamp 1970 350 LT-1 rebuilt short block solid cam, 020 high performance block all forged parts Price = Short blocks $2700-$3500 Gen 4 BBC 454 bare block 1972 4 bolt mains Price = Bare block $900 Chevy 302 rebuilt short block all forged parts Price = SBC short block s $3200 #291 sq port heads complete dated 1971 stock closed chamber Price = $ 1,100.00 a pair BBC Victor & Weiand sq port intakes Price = intake s BBC $175 up BBC low profile oil pans Price = Pans $75 454 forged GM crankshaft Price = 454 crank $400 030 over 454 forged TRW flattop pistons Price = pistons $200 Reconditioned hi performance rods GM Price = Rods $350 Contact Info = E-mail streblin@yahoo.com 000212 |
|
Chevy Valve Covers |
| Mopar Transmission Description - 727 Mopar transmission for small block V-8 good when removed. Quantity = 1 Price = $ 285.00 Contact Info = email cmarmes@aol.com or call 765-617-8781 000205 |
| Engine and Trans Description = 1954 Ford 239 Y-Block with Ford-O-Matic Trans Quantity = 1 Price = $100.00 obo Contact Info = Call John at 440-655-3691 000200 |
| Cadillac Motors Description = 500cubic inch Cadillac motors, 1976, one running one not. Quantity = 2 Price = $ 650.00 for both Contact Info = alsrpme@yahoo.com or call 412 823 5909 000199 |
| Small Block 67-68 Camaro
parts Description = exhaust manifolds, alternator and power steering brackets, RS headlight control valve. Quantity = Package Deal, Must sell, moving. Price = Asking $100. Contact Info = armycam68@hotmail.com or call 724-548-1456 (Kittanning, PA) 000198 |
| Chevy Drive Shaft Description = 1966 Chevy Caprice Quantity = 1 Price = $ 125.00 Contact Info = Chuck at 440-951-9543 000197 |
| Huge Model A parts collection
Description = I need the room and am ready to deal, any Big block Chevy parts considered on trade! 6 complete motors, 40 front and rear fenders, 6 doors, windshield frames, rear ends, 4 complete wishbones front ends, 1 is already hydraulic! 60 rims, hoods 6 sets of running boards, 6 transmissions w/bellhousings and on and on it goes.... Let me know what you need Quantity = pieces sold individually or would love to sell as a lot. Price = Make any offer! Any reasonable offer will be accepted I want this stuff gone! Contact Info = 440-813-6093 (Geneva, Ohio) 000196 |
| 10 Bolt Nova Rearend Description = 3:42 gears, all new bearings, one new axel, Photo's available. Quantity = 1 Price = $ 350.00 Contact Info: ikea6e@zoominternet.net or call 724-287-5144 000195 |
| Chevy 409 Bellhousing &
Parts Description = GM Part # 3779553 and clutch fork for same GM # 3765374. Fits 1962 Impala SS 409, 60 to 62 Vette, 60 to 61 SHP 348. Also have the flywheel, GM 10, L285, GM # 3789733. All in excellent condition Quantity = 1 Price = $ 400.00 for the Bellhousing and Fork. Buyer pays shipping.... Price = $ 200.00 for the flywheel, clutch and pressure plate. Buyer pays shipping.... Contact Info: puttsville@adelphia.net 000193 |
| Corvette Heads Description = ATTN: Corvette restorers, 1 pair 1962 to 1967 double hump fuel injection heads casting number 378461 unmolested and ready to install. Quantity = One pair (2) Price = $ 900.00 Contact Info = Call Bill @ 440-871-8881 or e-mail bcwideopen@aol.com 000192 |
| Misc. 55, 56 & 57 Chevy Parts Description = Good Condition Quantity = 1 Price = Call and discuss a fair price Contact Info = Call 440-354-0420 and ask for Dave 000191 |
|
Chevrolet 3 Speed Transmission
with Overdrive |
|
Chevrolet 3 Speed Transmission |
|
Chevrolet Engine |
|
Chevrolet Engine |
|
Chevrolet Engine & Transmission |
| Engine Description = 406 SMALL BLOCK PROF. BUILT. NEW 5.7 HIGH PERF RODS, CRANK.CAM BEAR, BALANCER LITE WEIGHT FLYWHEEL, FLATTOP PISTONS, COMP. ROLLER CAM AND ROCKERS 2.25 INT. MACHINED HEADS Quantity = COMPLETE EXCEPT CARB. Price = $ 3,500.00 Contact Info = 954-294-8196 or 724-567-6391 or raceman2001@aol.com 000185 |
| Short Block Description = Ford 428 Standard Bore Short Block Quantity = 1 Price = $1,500.00 plus shipping. Contact Info = fanugon@yahoo.com 000184 |
| Engine Description = 4 bolt main 350 bare block with LT-1 pistons, rods(pink) and crank (forged) Engine has less than 1500 miles on it. Cam is 300 HP/327. Everything was bought new in early 70's in pieces. Engine is located in Greensburg Pa Quantity = 1 Price = $1,400.00 Contact Info = gearhead2@atlanticbb.net cell is 814-243-8260. 000180 |
| Transmission Description = Saginaw 4 speed transmission, in good condition. No shifter on it but it's ready to install and works fine Quantity = 1 4 speed transmission Price = asking $ 200.00 Contact Info = email amcskip@yahoo.com or call 428-6782 000178 |
| Engines and Rearend Description = Many 1932 Ford V8 original engine, rebuilt short block several years ago and never installed in a car, truly authentic 32, comes with flywheel and pressure plate Price = $ 4,500.00 1933-34 Ford V8 recent rebuilt engine, less than 100 miles on engine, was used while original engine was being rebuilt, shortblock with flywheel and clutch plate Price = $ 3,500.00 1936 Ford V8 LB (insert bearing) used short block with all internal parts, flywheel, pressure plate and oil pan, .005 over, not running, as found Price = $ 1,200.00 1932 Ford complete rear-end, drive-shaft, axles, housings, drums, brakes, radius rods, spring, a nice used complete stock unit Price = $ 500.00 All parts are to be picked up in Perry, Ohio. Too heavy or too big for me to ship, local deliveries may be possible. Contact Info = Email me at sportycpe@yahoo.com or call evenings at 440-259-5466 and ask for Jim. 000175 |
| Water Pump Description = 1973 Buick water pump, good condition, did not leak when removed from 350 cubic inch 4 barrel engine. Quantity = 1 Price = $25.00 Contact Info = Call 440 729 7515 000172 |
| Body Parts & Transmission Description = 4 doors with power windows, both front fenders, trunk lid- silver gray, perfect shape for 2000 Chevy cavalier also auto trans for same with 34k miles Price = $ 600.00 for all or will sell separately shipping cost extra Contact Info = E-mail at tgarvin@ameritech.net or call 330-434-4588 between 10:00am and 6:00pm Monday to Friday |
| Big Block Blocks and Parts Description: Have blocks and other misc. parts, a few to choose from including '69 4 bolt 396 and 427. Also have a few sets of heads. Price: call for pricing Contact Info: email @ claing01@hotmail.com or call Paul at (home) 440-352-4219 or (cell) 440-478-2779 000166 |
| Model A Parts Description = 3 frames, 4 front axles including wishbones, 1 rear end, Tudor Sedan Seats, motors and transmissions, aprons, wire wheels and misc. pieces. Price = Make offer on entire lot. Contact Info = roseboystoys@adelphia.net 000163 |
| Engine & Transmission Description = A 454 Chevy engine and 350 transmission that have been overhauled. Lots of chrome on the engine. Price = 4,500.00 or Best Offer Contact Info = Call 350-7463 ask for Mark 000162 |
| Rear Ends Description = 9 inch rear end differential third member 28 and 31 spline posi's in various gear ratios. Also 8 inch posi 3rdmbrs Quantity = several 8 and 9 inch 3rd. members sold separately. Price = most sold at $ 400.00 Each Contact Info = email muzclecarmike@yahoo.com or call me at 530-632-6319 000161 |
| Entire Inventory of Closing
Classic Ford Business Description = Butler County Pa. Ford classic parts business closing. Numerous NOS and used [arts for Maverick, Mustang, Fairlane, etc. Too many to list here. Liquidating entire inventory including driveline parts, steering wheels, grilles, etc. Quantity = Entire inventory Price = Best offer over $1000 Contact Info = fordexchange@aol.com or 412-287-0220 or 724-321-2169 000157 |
| 1930 Pontiac Drive Train,
Rims, Springs, Fenders etc. Description = 1930 Pontiac 3 WC I kept the body, frame, doors & trunk. I want to sell the rest wood rims & tires, complete engine & trans, gas tank, bumpers, frt. fenders, rear springs, frt. springs straight axle & more Quantity = like to sell all or single Price = make offer Contact Info = email me at dougthedog565@yahoo.com or call 440-645-8817 000150 |
|
Ford Engine and Trans |
|
FMX Engine and Trans |
|
Cleveland Engine and Trans |
| Body Parts & Running
Gear Description = pair of 66-67 Chevy II tail lights, gas tank and sending unit for 66 Chevy II from California, 67 Chevy II 10 bolt rear end with 411 gears non posi Quantity = sold as a lot Price = $ 450.00 for all Contact Info = E-mail me at djp823@ncweb.com or call 440-992-9488 and ask for Dana 000140 |
| Transmission Description = one good gm Saginaw 4 speed. It has 2 id rings on input shaft Price = $ 20000 Contact Info = contact skip at 440-428-6782 or amcskip@yahoo.com 000139 |
|
Engine and Trans |
|
Drive Train and Suspension |
|
Transmission |
| Engine and Trans Description = Parts truck. 69 F100, good motor (I think a 390, but could be a 360) starts, many new parts, rebuilt C-6 trans (maybe 3000 miles on the rebuild)Truck has had no body work done to it ever, still has orig paint. Has rust and the cab had a tree fall on it. Asking $450.00 for the whole truck. Has many other good parts on it besides the motor and trans. Quantity = 1 Price = Asking 450.00 or offer. Would consider pulling motor and trans for addition cost. Contact Info = E-mail to pokeyracing@yahoo.com or call 419-663-1869 Truck is located in Collins, OH about 3 miles from Norwalk Raceway 000134 |
| Engine & Transmission Description = I have a 1978 Pontiac Trans Am High Performance HO 400 cubic inch, 6.6 liter engine with Edelbrook High Rise and transmission sitting on a stand! Price = $ 500.00 firm Contact Info = 440-487-9228 000115 |
| Engine Parts Description = I HAVE A 69 327 BLOCK AND I HAVE A SET HEADS FOR A 327 TOO. BOTH WILL NEED REBUILT MAKE ME AN OFFER ON THEM, Price = Best Offer Contact Info = YONS000@AOL.COM LOCATED IN COLLIERS, WV 000113 |
| Drive Train and Suspension Description = complete 1980 fiat drive train, 1995 cc motor ,5 speed trans, 5 link rear end. new clutch, all components included. starter, alt, brakes, etc. 75k miles on all. Quantity = all or part, Price = $600.00 for all, will trade for new convertible top, engine $250, trans. $200, rear end $300 Contact Info = email me at mtlman@sbcglobal.net or call 440-946-9702 after 3:30 daily. or let it ring on weekends cause I'm in the garage 000112 |
|
Drive Train |
|
Engine Parts |
|
Dana Rear End |
| Engine and Trans Description = 1965 289ci original motor, oil pan to air cleaner with c-4 trans. Will separate. Price = $ 450.00 / OBO Contact Info = 440-357-8937 000087 |
| Engine and Transmission Description = Ford 351 M/400 Catalyst Engine. 400 cubic inch with breakless distributer. This engine is complete from carb to oil pan with a C-6 Transmission attached. Price = Make Offer Contact Info = Call Bud at 440-354-8435 000077 |
| Engine and Transmission Description = 1948 - 216 straight 6 engine, 3 speed transmission and rear end. Good shape, motor runs. Price = $300.00 Contact Info = Call 440-357-0670 000076 |
|
|
|
Trans
Description = 350 Turbo for Chevrolet Quantity = 1 Price = $150.00 Contact Info = John at 440-285-2441 |
|
Engine
Description = 77 or 78 Oldsmobile 403
engine complete, still in car, runs good 40K miles Quantity = 1 Price = $350.00 Contact Info = John at 440-285-2441 |
|
P
Description = 700R4, newer front and
rear seals, set up for 85 Caprice, no longer needed. Quantity = 1 part. Price = $50.00 Contact Info = E-mail, |
|
P
Description = 66 Dodge Coronet 318
wide block. Was running when removed but tired. Complete Quantity = 1 Price = Best offer Contact Info = Mark D at 216-402-8877
or e-mail at mark@mcmobilitysystems.com
|
|
PARTS
= Drive Train and Suspension Description = 67 to 69 Camaro or Nova
parts Subframe
$150.00 Disc brakes
$395.00 Steering Box $ 95.00 Misc. Parts MSD Dist., coil, 6a box $250.00 3970010 350 4 bolt short block $650.00 882 GM heads 76cc bolt on $250.00 307-327 heads bolt on $150.00 67-69 Camaro Dash
W\speedo, light, etc $250.00 Price = Cash or Trade???? Contact Info = camaro69@netpenny.net or call 269.330.2076 ask for bill ( |
P
|
|
P
Description = Carbs
/ Quadrajets from 80 to 85 Riv,
Toro’s or Caddi Quantity = 2 Price = $ 40 Contact Info = E-mail me at – Cratemotor@sbcglobal.net
or 440-352-1384 leave a message |
|
Description = Will fit 1973 Pontiac,
Buick or Olds / Turbo 400 Long Tail, good condition with 70 K miles Quantity = 1 Price = $ 75.00 Contact Info = E-mail at lwmiller@beminc.com |
|
Engine and
Trans Description = 1966 Ford engine and
trans. 390 C.I. 320 H.P. C-6 auto. Will deliver within 50 miles of Quantity = 1 Price = $400.... Contact Info = E-mail at rhankins@neo.rr.com or call 330-326-2523 |
|
Engine Description = Chevy Engine, 307 CI Quantity = 1 Price = $ 100.00 Contact Info = Phil at 440-257-9171 |
P
|
P
|
|
Engine
Quantity = 1 Description = 1962 409 truck motor.
Did run. 068 block.
complete. Has 2 1/2
in exhaust with car water pump. Quantity = 1 Price = $2500.00 Contact Info = dkdc@prodigy.net |
|
Engine and Trans Description = Camshaft & Tappets
/ 396-427-454 /Cam = Erson #E120201 / Tappets
= Erson #E914501 / Grind
RV 15 H / Strong mid range power 1250 to 4250 / Duration 288' in 288'
out / Gross lift .492 in .492 out / Lobe center 112' / Quantity = 1 set Price = $ 100 for both Contact Info = Cratemotor@sbcglobal.net
or 440-352-1384 leave a message |